CS-102 Butyl Rubber Sealant

SEALING PROPERTIES

• Provides permanently flexible watertight joints.
• Low to high temperature workability: 30°F to 120°F (-1°C to +49°C)
• Rugged service temperature: -30°F to +200°F (-34°C to +93°C) Excellent chemical and mechanical adhesion to clean dry surfaces.
• Greater cohesive and adhesive strengths. Sealed joints will not shrink, harden or oxidize upon aging. Controlled flow resistance for application ease.
• ConSeal CS-102 meets or exceeds all of the requirements of Federal Specification SS-S-210 (210-A), AASHTO M-198B, and ASTM C990.
• No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.

HYDROSTATIC STRENGTH

ConSeal CS-102 meets the hydrostatic performance requirement as set forth in ASTM C990 section 10.1 (Performance requirement: 10psi for 10 minutes in straight alignment – in plant, quality control test for joint materials.)

SPECIFICATIONS

ConSeal CS-102 meets or exceeds all of the requirements of Federal Specification SS-S-210 (210-A), AASHTO M-98 Type B, and ASTM C990-91.

CHEMICAL COMPOSITION

IMMERSION TESTING

30-Day Immersion Testing: No visible deterioration when tested in 5% Caustic Potash (Potassium Hydroxide), 5% Hydrochloric Acid, 5% Sulfuric Acid, and 5% saturated Hydrogen Sulfide.

One Year Immersion Testing: No visible deterioration when tested in 5% Formaldehyde, 5% Formic Acid, 5% Sulfuric Acid, 5% Hydrochloric Acid, 5% Sodium Hydroxide, 5% Hydrogen Sulfide, and 5% Potassium Hydroxide.