CS-665 Non-Toxic Butyl Rubber Sealant

For concrete joints in: Drinking Water Cisterns and Potable Water Systems. Not intended for use in expansion joints or joints that move.

NSF Standard 61 Certified, Safe for Drinking Water Applications

SEALING PROPERTIES
  • Provides permanently watertight joints.
  • Excellent adhesion and structural integrity.
  • Bonds well to most surfaces, including: Concrete, Fiberglass, Metal,Plastic and Aluminum.
  • Sealed joints will not shrink, harden or oxidize upon aging.
  • Controlled flow resistance for application ease. Low to high temperature workability: 20°F to 120°F (-7°C to 49°C)
  • Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
  • No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.

TOXICITY EVALUATION

ConSeal CS-665 has been tested in compliance to the conditions specified in the Federal Hazardous Substance Act (16CFR 1500).Test Results conclusively show that CS-665 is classified as non-toxic by oral administration.

ConSeal CS-665 has been certified by NSF International to conform to the requirements of NSF/ANSI/CAN Standard 61 (Drinking Water System Components) Section 6. Joining and Sealing Materials.

PHYSICAL PROPERTIES

Description Test Method CS-665
Color Green
Specific Gravity, 77°F (25°C) ASTM D71 1.35–1.50
Ductility, 77°F (25ºC): ASTM D113 6 cm
Penetration, Cone 77°F (25°C)
150 gm, 5 sec.
ASTM D217 60–75 dmm
Penetration, Cone 32°F (0ºC):
150 gm, 5 sec.
ASTM D217 50–55 dmm
Flash Point, C.O.C. ASTM D92 350°F (177ºC)
Fire Point, C.O.C. ASTM D92 400°F (204ºC)
Volatile Matter, % by Weight ASTM D6 2%