CS-213 Geotextile Backed Exterior Joint Wrap

For joints in: Box Culverts, Underground Concrete Vaults, Segmented Bridge Structures, Wastewater Structures and Arched Bridge Structures, Manholes. Not intended for use in expansion joints or joints that move.

SEALING PROPERTIES

  • Chemically resistant butyl resin sealant laminated to a temperature resistant geotextile fabric.
  • High strength materials provide excellent resistance to puncture, tear and abrasion.
  • Aggressively bonds to concrete and metal structures.
  • Provides a flexible seal which becomes a permanent part of the pavement structure when the tack coat and asphalt are applied over the ConWrap CS-213.
  • Geotextile fabric absorbs asphalt tack coat at a rate of approximately 0.30 gallons per square yard.
  • Application temperature range: 0°F to 120°F (-18°C to 48°C)
  • Service temperature range: -50°F to 330°F (-45°C to 165°C)
  • ConWrap CS-213 will not shrink or oxidize upon aging.
  • Available in numerous standard sizes:
    • Standard thicknesses: 0.065” and 0.100”
    • Standard widths: 6”, 12”, and 24”

SPECIFICATIONS

Butyl Resin Sealant meets the requirements of ASTM Specification C990, Federal Specification SS-S00210 (210A) and AASTHO M-198(B).

SEALANT

DESCRIPTION SPEC REQUIRED* CS-213
HYDROCARBON BLEND CONTENT % BY WEIGHT: ASTM D4 (mod.) 50-70 51.2
INERT MINERAL FILLER % BY WEIGHT: ASTM C990 30% min. 48.8.
VOLATILE MATTER % BY WEIGHT: ASTM C990 2.0 max. 1.2
SPECIFIC GRAVITY, 77°F: ASTM C990 1.15-1.50 1.34
DUCTILITY, 7°F: ASTM D113 5.0 min. 12
PENETRATION, CONE 77°F, 150 gm. 5 sec.: ASTM D217 50-120 mm 80-90 mm Softening point, ring
AND BALL °F: ASTM D36 320°F min. 320°F+
FLASH POINT, C.O.C., °F: ASTM C990 350°F min. 450°F

GEOTEXTILE BARRIER

DESCRIPTION SPEC UNITS* GEOTEXTILE BARRIER
GRAB TENSILE, lbs.: D4632 lbs. 120
ELONGATION: D4632 % 50
PUNCTURE RESISTANCE: D4833 lbs. 90
BURSTING STRENGTH (MULLEN BURST): D3786 psi 300
TRAPEZOID TEAR: D4533 lbs. 45