CS-1800 Solvent Free, Waterproofing Membrane

ConSeal CS-1800 Waterproofing Membrane for use on concrete structures, including foundations, box culverts, manhole risers, lift stations, septic tanks, utility vaults, burial vaults, vertical panel structures, bunker silos, concrete structure patching, and grouting. Additional uses include some metal, fiberglass, and plastic applications. Not intended for expansion joints or joints that move.

Performance Properties

  • Finish: Semi-Gloss, Elastomeric Rubber
  • Colors: Black, Dark Grey, and White
  • Solvent & Isocyanate Free, 100% Solids, Will Not Shrink
  • California Proposition 65 compliant
  • No degradation in 0.5 pH sulfuric acid immersion per – (ASTM C1898)
  • Meets ASTM C836 Requirements
  • Positive waterproofing capabilities up to 100 psi – (ASTM D5385)
  • Thermal shock resistant, elastomeric rubber membrane. 
  • Can be applied with brush, roller, trowel, sprayer or squeegee.
  • Tack free in less than 90 minutes. Paintable.
  • Can be used in confined spaces without respiratory protection. See Safety Data Sheet (SDS) for details.
  • Indoor/outdoor application
  • Superior Adhesion to most construction materials, including: Concrete, Metal, Fiberglass, Plastic, PVC, Glass, Aluminum, and Wood.

Physical Properties

Property
CS-1800 Value
Test Method
Cure System Hybrid, Moisture Cure
VOC Content 14.2 grams/liter
Viscosity 210,000 – 390,000 centapoise
Cure Rate 1/8” every 24 hours (77°F at 50% Relative Humidity)
Coverage Rate 50 ft2/gallon per 30 mils coat

Performance Characteristics

Property
CS-1800 Value
Test Method
Shear Strength 132 psi ASTM D1002
Tensile Strength 113 psi ASTM D412
Elongation 535% ASTM D412
Adhesion to Concrete (Clean, Dry) 33 pli, cohesive failure ASTM C794
Shore OO, Hardness 67 ASTM C2240
Shrinkage No measurable shrinkage after 14 days
Service Temperature -40°F to 225°F (-40°C to 104°C), continuous service
Application Ambient Temperature 40°F to 130°F (4°C to 55°C)
Application Surface Temperature 40°F to 130°F (4°C to 55°C)
Approximate Curing Schedule
Surface Temp. & 50% Relative Humidity Dry to Touch Min. Recoat Time Service Ready
50°F (10°C) 90 Minutes 5 Hours 72 Hours
75°F (24°C) 90 Minutes 4 Hours 72 Hours
90°F (32°C) 90 Minutes 4 Hours 72 Hours

Curing schedule based on 40 mils applied to clean, dry concrete.
Consider strength of skin layer prior to recoating.

FREE Ground Shipping available for orders over $150!

 

Directions for Use

Surface Preparation
Concrete: Surface must be free of form release, curing compounds, sealers, loose debris or other contaminants. Sand blasting, power washing, wire brushing, or other appropriate cleaning techniques can be utilized. Dry all visible and standing water prior to applying CS-1800. Make sure the surface is free of frost. Metal: Surface must be free of loose debris or other contaminants. Sand blasting, power washing, wire brushing, or other appropriate cleaning techniques can be utilized. Dry all visible and standing water prior to applying CS-1800. Fiberglass/Plastic: Surface must be free of form release, loose debris or other contaminants. Sand blasting, power washing, wire brushing, or other appropriate cleaning techniques can be utilized. Dry all visible and standing water prior to applying CS-1800. DO NOT USE petroleum solvents such as Mineral Spirits or Xylene for surface preparation.
Priming: For applications with continuous water immersion ConSeal recommends using a surface primer. ConSeal CS-80 and ConSeal CS-85 are specifically designed for ConSeal’s elastomeric sealants.
Application Instructions: Maintain CS-1800 at room temperature (~70°F) before applying to ensure easy application. Utilizing a brush, roller, trowel, or squeegee; apply CS-1800 onto the prepared surface at the desired millage. Spread rate: 50 sq. ft./gal. per 30 mils coat (nominal). If a second coat is necessary, apply as soon as possible. When recoating ensure the skin layer is clean, dry, and has met curing requirements. 
Packaging & Storage: Available in 2-gallon pails – 56 pails per pallet. 12-month shelf life from manufacture date when stored in a cool, dry area. Elevated temperatures > 100°F may reduce shelf life. Shelf life after opening is 6-month maximum, less manufacture shelf life. Remove top skin layer. Product consistency may thicken.