Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
made-in-usa

CS-1550 Instant Grab Adhesive-Sealant

Designed as a single component, gun-grade, non-sagging, moisture-activated mounting adhesive-sealant which forms a quick tack bond with strong green strength and instantly provides bonding without need for additional support. CS-1550 can be used for new construction and repair applications, such as: adhesive for preformed sealants, joining concrete risers and blocks, and more!

PERFORMANCE PROPERTIES        

Features
  • Finish: White, Mildew Resistant, Elastomer
  • Solvent & Isocyanate Free, 100% Solids, Will Not Shrink
  • California Proposition 65 compliant
  • Tack free skin forms in 40 minutes (77°F at 50% Relative Humidity)
  • Full cure takes place in 24 to 48 hours for ¼” beads and smaller.
  • Excellent weatherability when exposed to: Ultraviolet Radiation, Rain, Infrared Radiation, and Atmospheric Hydrocarbons.
  • CS-1550 can be painted with emulsion or synthetic enamel paints.
  • Resilient elastomer that adheres to most construction materials, including: Concrete, Metal, Fiberglass, Plastic, PVC, Glass, Aluminum and Wood.

PHYSICAL PROPERTIES

Property
CS-1550 Value
Test Method
Cure System Hybrid, Moisture Cure
VOC Content 75.5 grams/liter
Cure Rate 

(77°F at 50% Relative Humidity)

1/8” every 24 hours
Gun Grade Zero Slump ASTM C639

PERFORMANCE CHARACTERISTICS

Property
CS-1550 Value
Test Method
Tensile Strength 469 psi ASTM D412
Elongation 162% ASTM D412
Shore A, Hardness 43 ASTM D661
UV Stability, 

Accelerated Weathering

UV-A, No Change (2,000 hours) QUV Weatherometer
Shrinkage No measurable shrinkage after 14 days
Service Temperature -40°F to 220°F (-40°C to 104°C), continuous service
Application Ambient Temperature 40°F to 130°F (4°C to 55°C)
Application Surface Temperature 40°F to 130°F (4°C to 55°C)

Directions for Use

Surface Preparation: The concrete must be clean and free from dust, dirt, grease and debris before applicatio of CS-1550. Inspect surface for soundness. When surface is clean, sound and dry proceed with using the CS-1550.
Note:  Make sure the surface is free from frost prior to application.
DO NOT USE petroleum solvents such as Mineral Spirits or Xylene for surface preparation.
Priming: For applications with continuous water immersion ConSeal recommends using a surface primer. ConSeal CS-80 is specifically designed for ConSeal’s elastomeric sealants.
Application Instructions: Maintain CS-1550 at room temperature before applying to ensure easy application.  CS-1550 may be factory or field applied to seal various construction components.  Work CS-1550 into rough surfaces to optimize surface contact.
Packaging and Storage: Available in 9.5-fl. oz. cartridges (280mL) and 20.2-fl. oz. sausages (600mL).
12-month shelf life from manufacture date when stored in a cool, dry area. Elevated temperatures >100° F may reduce shelf life.
Coverage and Full Cure Rates: 9.5-ounce cartridges: ½” diameter bead covers 7.6 linear feet.
Full cure for ¼” bead is 48 hours (77°F at 50% Relative Humidity).