Orders
General Inquiries
Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
made-in-usa
Back to Products

CS-1440 Chemical Resistant, Elastomeric Joint Sealant

CS-1440 is a premium-grade, dual-component, self-curing, ASTM C920 compliant elastomeric sealant, with strong chemical resistance against: bases, fuels, oils, and solvents. Elastomeric formula allows for use on static and dynamic joints in original construction and repairs.

PERFORMANCE PROPERTIES

Features
  • Finish: Black, Elastomeric Rubber.
  • Meets ASTM C920, Type M, Grade NS, Class 50, Uses NT, M, G, A, and O.
  • Resistant to hydrocarbons and excellent chemical resistance, reference chemical resistance chart for details.
  • 2 Component, self curing.
  • No shrinkage upon cure.
  • Tack free skin formed in 60 minutes (77°F at 50% Relative Humidity).
  • Flexible resilient compound that adheres to most construction materials including: Concrete, Metal, Glass, Aluminum and More.

 

PHYSICAL PROPERTIES

Property
CS-1440 Value
Test Method
Cure System Chemical Cure
VOC Content Part A: 0 g/l
Part B: 7.7 g/l
Cure Time

(77°F at 50% Relative Humidity)

 4 hours
Gun Grade Zero Slump ASTM C639

PERFORMANCE CHARACTERISTICS

 

Property
CS-1440 Value
Test Method
Elongation 646% ASTM C412
Tensile Strength 11.61 psi ASTM D412
Adhesion to Concrete 2.3 lbf, Cohesive failure ASTM D794
Shore A, Hardness 15 ASTM D661
UV Stability, Accelerated Weathering (250 hrs) UV-A, no cracking or chalking ASTM D793
UV Stability, Accelerated Weathering (2000 hrs) UV-A, noticeable change in color, no cracking or chalking ASTM D793
Service Temperature -40°F to 158°F (-40°C to 70°C), continuous service
Application Ambient Temperature 40°F to 130°F (4°C to 55°C)
Application Surface Temperature 40°F to 130°F (4°C to 55°C)

 

DIRECTIONS FOR USE

Surface Preparation: The concrete must be clean and free from dust, dirt, grease and debris before application of CS-1440. Inspect surface for soundness. When surface is clean, sound and dry proceed with using the CS-1440.
Note:  Make sure the surface is free from frost prior to application.
DO NOT USE petroleum solvents such as Mineral Spirits or Xylene for surface preparation.
Priming: Do no use a primer with CS-1440.
Mix Ratio A:B  2:1 ratio by weight
Mix Instructions: Mix each part separately. Scrape Part B into Part A, powered drill and paddle mixer.
Application Instructions: Apply by troweling into joint, or with bulk caulk gun. Avoid air entrapment when applying sealant.
Cure Time: 4 hours (77°F at 50% Relative Humidity).
Pot Life: 30 minutes (77°F at 50% Relative Humidity).
Clean Up: Clean equipment and spill while the product is wet. Clean with MEK or Acetone. Mechanical scraping will be necessary for cured product.

 

Downloads

Recommended Specifications