Two-part, high-build, primerless, 100% solids, solvent-free epoxy coating for concrete and metal. Produces a thick durable polymer film that protects the surface from penetration when exposed to gasoline, oil, hydrocarbons, bases, acids, and many other chemicals. High-build formula allows for excellent coverage and protection over irregular shapes.
| DESCRIPTION | CS-98 |
|---|---|
| Color: | Black, Gray, Red, Orange, Green, Yellow, Blue |
| Solids Content | 100% |
| Adhesion to Brushed Steel (ASTM D4541): | 1,900 psi |
| Bond Strength (ASTM C882): | 7,382 psi |
| Adhesion to Concrete (ASTM D7234): | Substrate Failure |
| Abrasion Resistance (ASTM D4060): | 7.3mg loss (1 kg – 1000 cycle CS-17 wheel) |
| Flexural Strength (ASTM D790): | 17,000 psi |
| Salt Fog Exposure (ASTM B117): | No rusting after 1000 hours |
| Product Storage Temperature: | 40°F to 104°F (4ºC to 40ºC) |
| Product Shelf Life: | 12 months (unopened) |
REFERENCE INSTALLATION INSTRUCTIONS FOR ADDITIONAL DETAILS, AND CONTACT CONCRETE SEALANTS FOR PROJECT-SPECIFIC GUIDANCE.
| DESCRIPTION | CS-98 |
|---|---|
| Color: | Part A: Color; Part B: Yellow-White/Dark Beige. |
| Mix Ratio A:B | 2:1 ratio by weight, do not thin or dilute. |
| Mix Instructions: | Stir each part separately. Add Part A into Part B and mix continuously until a uniform mixture is achieved. For proper performance, CS-98 must be mechanically mixed using a powered drill and paddle mixer. Start and stop drill with mixer blades fully submerged. |
| Application Method: | Apply CS-98 using a brush, roller, or professional spray equipment. |
| Curing and Recoat: | The coating will typically cure within 4 to 6 hours, with cure time decreasing at higher ambient temperatures. CS-98 will not cure effectively at temperatures below 40°F (4ºC). If an additional coat is required, lightly abrade the cured surface prior to reapplication to ensure proper adhesion. |
| Recommended Film Thickness: | 30-mil dry (minimum). Apply liberally; no shrinkage upon cure (Dry film thickness is equivalent to wet film thickness). |
| Coverage Rate: | 50 SF/gal (30-mil dry). |
| Clean Up: | Mechanical scraping will be necessary to clean up cured product. CS-98 can be cleaned with denatured alcohol, MEK, or acetone while wet. |
