CS-95 Ultra-Performance Epoxy Coating

Two-part, 100% solids, solvent-free epoxy coating for concrete and metal. Produces a durable polymer film that protects the surface from penetration when exposed to gasoline, oil, hydrocarbons, bases, acids, and many other chemicals.

PERFORMANCE PROPERTIES

  • Durable, solid coating after cure
  • Can be applied with brush or roller
  • Polymer film protects against water intrusion
  • Excellent resistance up to 613°F (323°C)
  • Excellent fuel resistance
  • Indoor application
  • Tack free time: 4 Hours @72°F (22°C)
  • In service: 24 hours minimum
  • Pot life after mixing: 30 minutes @77°F, 1 Hour @40°F
  • Recommended coating thickness 10-20 mils wet
  • Coverage rate: 160 SF/Gal (10-mil dry)
  • Passes Severe Wastewater Analysis Testing (SWAT) – ASTM G210-13 (23)

PHYSICAL PROPERTIES

DESCRIPTION CS-95
COLOR: Black, White, Gray, Red, Orange, Green, Yellow, Blue
% SOLIDS: 100%
FLASH POINT: Part A: >212°F(100°C); Part B: >185°F(85°C)
APPLICATION TEMP. RANGE: 40°F to 120°F (4°C to 48°C) ambient and/or Surface Temperature
MOISTURE / HUMIDITY: Concrete must have a surface moisture reading of less than 5%
POT LIFE: 30 minutes
CURE TIME: Tack free time: 4 Hours @72°F. In service: 24 hours minimum
COVERAGE PER GALLON: 160 SF/Gal (10-mil dry)
MIXING INSTRUCTIONS: Mix each part separately. Add Part A into Part B and mix well. For applications requiring less than one gallon, consult Concrete Sealants technical staff for appropriate instructions.
COATS: 2 coats. After coat has cured, abrade the surface and another layer can be applied.

DO NOT SUBJECT CS-95 TO FREEZING TEMPERATURES.