ConSeal CS-1500SL
Self-Leveling, Elastomeric Sealant
- Finish: Light Gray, Mildew Resistant, Elastomeric Rubber
- Solvent & Isocyanate Free, 100% Solids, Will Not Shrink
- High solids, tack-free surface in minutes
- California Proposition 65 Compliant
- Meets ASTM C920, Type S ,Grade P, Class 50, Uses M, A, G, O
FREE Ground Shipping available for orders over $150!
Orders typically ship in 1-business day or less (M-F)!
For bulk order or concrete producer pricing, Contact Us.
$67.98 – $482.63
PRODUCT INFORMATION
DOWNLOADS / SPECS
PRODUCT INFORMATION
CS-1500SL Self-Leveling, Elastomeric Sealant
CS-1500SL is designed for use on original construction and repairs for horizontal expansion joints in concrete and cementitious slabs that are subject to structural movement, including: driveways, garages, sidewalks and factories.
PERFORMANCE PROPERTIES
Features
- Finish: Light Gray, Mildew Resistant, Elastomeric Rubber
- Solvent & Isocyanate Free, 100% Solids, Will Not Shrink
- High solids, tack-free surface in minutes
- California Proposition 65 Compliant
- Meets ASTM C920, Type S ,Grade P, Class 50, Uses T1, M, A, G, O
- Tack free skin forms in 1 hour (77°F at 50% Relative Humidity)
- Full cure takes place in 24-48 hours for 1⁄4” beads and smaller
- Excellent weather-ability when exposed to UV radiation, rain, infrared radiation and atmospheric hydrocarbons
- CS-1500SL can be painted with emulsion or synthetic enamel paints
- Flexible resilient rubber that adheres to most construction materials including: concrete, metal, fiberglass, glass, aluminum and many plastics, including PVC
- Moisture-cure, hybrid polymer
PHYSICAL PROPERTIES
Property |
CS-1500SL Value |
| Cure System | Hybrid, Moisture Cure |
| VOC Content | 26.1 grams/liter |
| Cure Rate (77°F at 50% Relative Humidity) | 1/8” every 24 hours |
PERFORMANCE CHARACTERISTICS
Property |
CS-1500SL Value |
Test Method |
| Movement Capability | ±50% | ASTM C719 |
| Tensile Strength | 143 psi | ASTM D412 |
| Shear Strength | 194 psi | ASTM D1002 |
| Elongation | 176% | ASTM D412 |
| Adhesion to Concrete | 28 pli, cohesive failure | ASTM D794 |
| Shore A, Hardness | 24 | ASTM D661 |
| UV Stability,Accelerated Weathering | UV-A, No Change (2,000 hours) | QUV Weatherometer |
| Shrinkage | No measurable shrinkage after 14 days | |
| Service Temperature | -40°F to 220°F (-40°C to 104°C), continuous service | |
| Application Ambient Temperature | 40°F to 130°F (4°C to 55°C) | |
| Application Surface Temperature | 40°F to 130°F (4°C to 55°C) | |
FREE Ground Shipping available for orders over $150!
DIRECTIONS FOR USE
Surface Preparation: The concrete must be clean and free from dust, dirt, grease and debris before application of CS-1500SL.
Inspect surface for soundness. When surface is clean, sound and dry proceed with using the CS-1500SL.
Note: Make sure the surface is free from frost prior to application.
Inspect surface for soundness. When surface is clean, sound and dry proceed with using the CS-1500SL.
Note: Make sure the surface is free from frost prior to application.
DO NOT USE petroleum solvents such as Mineral Spirits or Xylene for surface preparation.
Priming: For applications with continuous water immersion ConSeal recommends using a surface primer. ConSeal CS-80 and CS-85 are specifically designed for ConSeal’s elastomeric sealants.
Application Instructions: Maintain CS-1500SL at room temperature before applying to ensure easy application. CS-1500SL may be factory or field applied to seal various construction components. Work CS-1500SL into rough surfaces to optimize surface contact. CS-1500SL is not to be installed in ratios where joint depth is greater than half of the width. CS-1500SL is not designed to bridge gaps larger than 1” or penetrate into joint depth further than 1⁄2”. The use of a backer rod may be necessary in some applications. If using to fill cracks, avoid air entrapment by filling void with continuous bead of CS-1500SL.
Packaging and Storage: Available in 10.1-fl. oz. cartridges (298 mL), 20.2-fl. oz. sausages (600mL), 28.5-fl. oz. cartridges (842mL) and 5-gallon pails. 12-month shelf life from manufacture date when stored in a cool, dry area. Elevated temperatures >100° F may reduce shelf life.
Coverage and Full Cure Rates: 10.1-ounce cartridges: 1⁄2” diameter bead covers 7.5 linear feet. Full cure for 1⁄4” bead is 48 hours (77°F at 50% Relative Humidity).
Application Instructions: Maintain CS-1500SL at room temperature before applying to ensure easy application. CS-1500SL may be factory or field applied to seal various construction components. Work CS-1500SL into rough surfaces to optimize surface contact. CS-1500SL is not to be installed in ratios where joint depth is greater than half of the width. CS-1500SL is not designed to bridge gaps larger than 1” or penetrate into joint depth further than 1⁄2”. The use of a backer rod may be necessary in some applications. If using to fill cracks, avoid air entrapment by filling void with continuous bead of CS-1500SL.
Packaging and Storage: Available in 10.1-fl. oz. cartridges (298 mL), 20.2-fl. oz. sausages (600mL), 28.5-fl. oz. cartridges (842mL) and 5-gallon pails. 12-month shelf life from manufacture date when stored in a cool, dry area. Elevated temperatures >100° F may reduce shelf life.
Coverage and Full Cure Rates: 10.1-ounce cartridges: 1⁄2” diameter bead covers 7.5 linear feet. Full cure for 1⁄4” bead is 48 hours (77°F at 50% Relative Humidity).
DOWNLOADS / SPECS