CS-102B Bituminous, Butyl Rubber Sealant
For concrete joints in: Manholes, Concrete Pipe, Vaults, Box Culverts, Septic Tanks, and Vertical Panel Structures. Not intended for use in expansion joints or joints that move.
SEALING PROPERTIES
- Provides permanently flexible watertight joints.
- Low to high temperature workability: 45°F to 120°F (-1°C to +49°C)
- Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
- Excellent chemical and mechanical adhesion to clean dry surfaces.
- Greater cohesive and adhesive strengths.
- Sealed joints will not shrink, harden or oxidize upon aging.
- Controlled flow resistance for application ease.
- No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.
HYDROSTATIC STRENGTH
ConSeal CS-102B meets the hydrostatic performance requirement as set forth in ASTM C-990 section 10.1 (Performance requirement: 10psi for 10 minutes in straight alignment – in plant, quality control test for joint materials.)
SPECIFICATIONS
ConSeal CS-102B meets or exceeds all of the requirements of Federal Specification SS-S-210 (210-A), AASHTO M-198B, and ASTM C-990-91.
CHEMICAL COMPOSITION
| DESCRIPTION | SPEC | REQUIRED | CS-102B |
|---|---|---|---|
| HYDROCARBON PLASTIC CONTENT % BY WEIGHT: | ASTM D4 (mod.) | 50-70 | 52.1 |
| INERT MINERAL FILLER % BY WEIGHT: | SS-S-210A | 30-50 | 47.9 |
| VOLATILE MATTER % BY WEIGHT: | ASTM D6 | 2.0 max. | 1.2 |
IMMERSION TESTING
30-Day Immersion Testing: No visible deterioration when tested in 5% Caustic Potash, 5% Hydrochloric Acid, 5% Sulfuric Acid, and 5% saturated Hydrogen Sulfide.
Physical Properties
| DESCRIPTION | SPEC | REQUIRED | CS-102B |
|---|---|---|---|
| COLOR: | Black | ||
| SPECIFIC GRAVITY, 77°F: | ASTM D71 | 1.15-1.50 | 1.25 |
| DUCTILITY, 77°F: | ASTM D113 | 5.0 min. | 6 |
| SOFTENING POINT, RING AND BALL °F: | ASTM D36 | 320°F min. | 370°F+ |
| PENETRATION, CONE 77°F: | ASTM D217 | 55-100 dmm | 55-60 dmm |
| 150 gm, 5 sec. | |||
| FLASH POINT, C.O.C., °F: | ASTM D92 | 350°F min. | 375°F |
| FIRE POINT, C.O.C., °F: | ASTM D92 | 375°F min. | 475°F |