Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

Stormwater Drainage Control – Minneapolis Airport


PROJECT LOCATION:

United States, Minneapolis – St. Paul International Airport, Minneapolis, Minnesota

THE SITUATION:

In 2002 a stormwater drainage control system was installed at the Minneapolis – St. Paul International Airport. For this system, watertight precast concrete box culverts and circular concrete pipes were used to transport stormwater. To create an effective stormwater drainage control system, watertight joints are required; therefore, a sealant that has these watertight qualities was necessary.

THE SOLUTION:

CS-102 was used in the joints of the box culverts and circular concrete pipes to provide watertight seals. Also, CS-212 was used on the exterior of the joints to keep soil from infiltrating the joints. CS-231 was also used on this project. CS-231 was used to create a watertight seal between concrete pipes and a cast-in-place concrete vertical shaft.

Sealant Application:

  • Box Culverts
  • Circular Concrete Pipe

ConSeal Products Used:

Applicable Industry Standards:

  • ASTM C-990
  • ASTM 877 Type III