Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

CS-55 Water Based Acrylic Coating

Surface Preparation Coating and Installation Aid for Concrete and Metal Surfaces. For use on most concrete structures.

Technical Data

SEALING PROPERTIES

  • Fast drying concrete damp-proof coating.
  • Can be applied effectively with a brush, paint roller or sprayer.
  • Soap and water clean up.
  • Environmentally responsible.
  • Suitable for indoor application without specialized paint areas.
  • Nearly three times the coverage of typical tar or asphalt based products (300 - 350 sq. ft. per gallon).
  • Smooth, hard, polymer film that protects against water intrusion.
  • Wide range of standard colors.
  • Custom colors available upon request.
  • Recycled Content, % by weight:
    • Post Industrial: 17%
  •        

SPECIFICATIONS

ConSeal CS-55 complies with E.P.A. regulation 40CFR261.4 for solid waste management. CS-55 is made with environmentally safe ingredients; disposal of containers does not present environmental problems.

IMMERSION TESTING

One Year Immersion Testing: No visible deterioration when tested in 5% Caustic Potash, 5% Hydrochloric Acid, 5% Sulfuric Acid, and 5% Hydrogen Sulfide.

Physical Properties

DESCRIPTIONCS-55
COLOR: Black
VISCOSITY: 2000 - 4000 centapoise
MIX INSTRUCTIONS: Mix lightly prior to use to assure homogenous mix
CURE TIME: Dry to touch in 30-60 minutes at 77°F/50% RH. Subsequent coating application may begin once the previously applied coating is dry to the touch. Complete curing is typically complete in 7 days
RECOMMENDED FILM THICKNESS: 2.0 – 5.0 mils dry (5 – 11 mils wet)
COVERAGE RATE: 344 ft2/gal yields 2 mil dry coverage
229 ft2/gal yields 3 mil dry coverage
172 ft2/gal yields 4 mil dry coverage
138 ft2/gal yields 5 mil dry coverage

Porosity and concrete surface profile will influence coverage rates.

HEAVY METALS TESTING

PARAMETEREPA LimitCS-55
ARSENIC:  5ppm  BDL
BARIUM:  100ppm  1.12ppm
CADMIUM:  1ppm  BDL
CHROMIUM:  5ppm  BDL
LEAD:  5ppm  BDL
MERCURY:  0.2ppm  BDL
SELENIUM:  1ppm  BDL
SILVER:  5ppm  BDL

SCRAPE ADHESION PERFORMANCE

FILM MILLAGE FORCEASPHALT COATING 0.071" RESULTCS-55 0.0038" RESULT
500g:  Passed with minimal damage  Passed with no damage
1000g:  Failed 2/3rds of coating scraped off  Passed with no damage
1500g:  Failed, complete film removal  Passed with minimal damage
2000g:  Failed, complete film removal  Passed with minimal damage
2500g:  Failed, complete film removal  Passed with minimal damage
Safety Data Sheet
Installation Instructions
Project Profiles