• Benonite-free Waterstop
  • Solvent-free Waterproofing Membrane
  • Tested and Proven Antimicrobial Concrete Admixture
  • Penetrating Surface Densifier and Hardener
Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

CS-665 Non-Toxic, Butyl Rubber Sealant

For self-sealing joints in: Drinking Water Cisterns and Potable Water Systems. Not intended for use in expansion joints or joints that move.

Technical Data

SEALING PROPERTIES

  • Provides permanently flexible watertight joints.
  • Excellent adhesion and structural integrity.
  • Bonds well to most surfaces, including: concrete, fiberglass, metal, plastic and aluminum.
  • Sealed joints will not shrink, harden or oxidize upon aging.
  • Controlled flow resistance for application ease.
  • Low to high temperature workability: 20°F to 120°F (-7°C to 48°C)
  • Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
  • No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.

TOXICITY EVALUATION

ConSeal CS-665 has been tested in compliance to the conditions specified in the Federal Hazardous Substance Act (16CFR 1500). Test Results conclusively show that CS-665 is classified as non-toxic by oral administration.

ConSeal CS-665 has been certified by NSF International to conform to the requirements of NSF / ANSI Standard 61 (Drinking Water System Components) Section 6. Joining and Sealing Materials.

Physical Properties

DESCRIPTIONSPECCS-665
COLOR:   Green
SPECIFIC GRAVITY, 77°F: ASTM D71 1.35 - 1.50
VOLITALE MATTER % BY WEIGHT: ASTM D6 1.2%
PENETRATION, CONE 77°F (25°C): ASTM D217 60-70 mm
150 gm, 5 sec.:    
PENETRATION, CONE 32°F (0°C): ASTM D217 50-55 mm
150 gm, 5 sec.:    
FLASH POINT, C.O.C., °F: ASTM D92 425°F
FIRE POINT, C.O.C. °F: ASTM D92 450°F
DUCTILITY, 77°F: ASTM D113 15.0
Safety Data Sheet
Installation Instructions
Recommended Specifications
Certificate of Conformance