• Benonite-free Waterstop
  • Solvent-free Waterproofing Membrane
  • Tested and Proven Antimicrobial Concrete Admixture
  • Penetrating Surface Densifier and Hardener
Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

CS-2000 High Performance Lubricant

High performance Water and Polymer Based Lubricant specially formulated for Concrete or PVC O-Ring Pipes.

Technical Data

SEALING PROPERTIES

  • High lubricity permits ease of assembly of O-Ring and Profile gasketed joints. ConLube forms a lubricating film on both the concrete and the gasket materials.
  • ConLube CS-2000 is a water-based gel manufactured with Non-Toxic, environmentally safe ingredients.
  • ConLube CS-2000 will not separate during prolonged storage.
    • Minimum shelf life: One year
  • ConLube CS-2000 contains Lanolin for promoting good skin care for your employees. ConLube CS-2000 is formulated with agents that restrict the growth of bacteria and micro-organisms commonly found in pipe joints.
  • Clean up of equipment, clothing and skin with simple soap and water.
  • Certified by The National Sanitation Foundation International (NSF) to conform to the requirements of ANSI / NSF Standard 61 (Drinking Water System Components) Section 6. Joining and Sealing Materials.

SUBAQUEOUS

Will not wash off when applied to pipe and submerged in water. Applies easily to wet surfaces.

WORKABILITY

Application Temperature Range: 10°F to 135°F (-12°C to 57°C).

COMPATIBILITY TESTING

 SBR Rubber 3 Day Immersion
@ 77°F (25°C)
SBR Rubber 3 Day Immersion
@ 158°F (70°C)
ConLube Durometer Change Volume Change Durometer Change Volume Change
CS-2000 >2 pts 0% >3 pts 0%

Test Method: Total immersion of a 2” piece of rubber gasket (60 durometer; Shore A) in closed container for 3 days at the specified temperatures.

 Isoprene Rubber 3 Day Immersion
@ 77°F (25°C)
Isoprene Rubber 3 Day Immersion
@ 158°F (70°C)
ConLube Durometer Change Volume Change Durometer Change Volume Change
CS-2000 >2 pts 0% >3 pts 0%

Test Method: Total immersion of a 2” piece of rubber gasket (60 durometer; Shore A) in closed container for 3 days at the specified temperatures.

Physical Properties

DESCRIPTIONConLube CS-2000
COLOR: Aqua
PENETRATION: 350mm maximum at 70°F (21°C)
200mm minimum at 0°F (-18°C)
TEST METHOD: ASTM D217 150gm cone, 5 seconds
VISCOSITY: 338,000 Cps. (Brookfield Helipath)
FREEZE-THAW RESISTANCE: 15 Cycles – No degradation
One Cycle: 16 hrs @ 0°F (-18°C)
One Cycle: Thaw 24 hrs. at room temperature
WASH-OFF RESISTANCE: 8% max. wash-off on both dry and wet concrete surfaces
TEST METHOD: 250ml/minute of water at a height of 2 feet for 5 minutes
AVAILABLE SIZES: • 1 quart containers
• 1 gallon pails
• 3.5 gallon pails
• 5 gallon pails
• 50 gallon drums
Safety Data Sheet

Safety Data Sheet (PDF) 
   US HazCom 2012