Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

CS-1800 Solvent Free, Waterproofing Membrane

ConSeal CS-1800 Waterproofing Membrane is a cold-applied single component, waterproofing compound that cures by exposure to atmospheric and substrate moisture to form a continuous, tough, reinforced elastic waterproof seal. In above grade applications, use CS-1800 to seal manhole riser systems, vertical panel structures, and a variety of concrete structures.

Technical Data

APPLICATIONS

ConSeal CS-1800 Waterproofing Membrane is a cold-applied single component, waterproofing compound that cures by exposure to atmospheric and substrate moisture to form a continuous, tough, reinforced elastic waterproof seal. In above grade applications, use CS-1800 to seal manhole riser systems, vertical panel structures, and a variety of concrete structures.

In below grade applications, CS-1800 is ideal as a positive-side waterproofing for sealing foundations, waterproofing box culvert, septic tanks and other underground construction. ConSeal CS-1800 is solvent free and compliant with all known environmental and OSHA requirements. It can be used in confined spaces without respiratory protection. CS-1800 forms an elastomeric rubber that is resistant to thermal shock. It will not crack in extreme cold or slump due to softening at high temperatures like conventional asphalt or coal tar based coating often will.

GREEN STANDARDS

NAHB Model Green Home Building Guidelines:

  • 5 Global Impact Points
  • VOC Content: less than 26 grams/liter ASTM D2369
  • EPA Method 24 (tested at 240°F & includes water)

ADVANTAGES

  • Resistant to hydrostatic pressures in excess of 60psi
  • Bonds to asphalt and concrete
  • Solvent free, 100% solids, will not shrink
  • 10 minute skin over, no dirt pick up
  • Superior adhesion to most construction materials

STORAGE

Store original, unopened containers in a cool, dry area. Protect unopened containers from water, heat, and direct sunlight. Elevated temperatures will reduce shelf life.

REGULATORY COMPLIANCE

  • Conforms to OTC Rule for Sealants & Caulks
  • Meets requirements for California Regulations:
    • CARB, BAAQMD, and SCAQMD
    • Conforms to California Proposition 65
    • Conforms to USDA Requirements for Non-Food Contact

PACKAGING

2 gallon pails – 60 pails per pallet

SHELF LIFE

Pails have a shelf life of 9 months when stored properly. See Application Guide and MSDS for proper storage procedures.

Physical Properties

DESCRIPTIONTYPICAL VALUETEST METHOD
SOLIDS CONTENT: 100% ASTM D-1644
SOLIDS CONTENT BY WEIGHT: 100% ASTM D-2697
TENSILE STRENGTH BY VOLUME: 95 psi ASTM D-2370
ELONGATION: 350% ASTM D-2370
TACK FREE TIME: 100 minutes ASTM C-679
WATER VAPOR TRANSMISSION: 0.06 perm inches ASTM E-96
SHORE OO HARDNESS: 60-64 ASTM D-2240
SHORE A HARDNESS: 10 +/- 3 ASTM C-661
LOW TEMP.: Pass ¼ inch mandrel ASTM D-816
FLEX: 20°F (-29°C)  
SHRINKAGE: No measurable shrinkage after 14 days
SERVICE TEMP.: -40°F to 200°F (-40°C to 94°C) continuous service
Safety Data Sheet

Safety Data Sheet (PDF)
   US HazCom 2012

Recommended Specifications
Product Calculator

Disclaimer: This calculator is designed to act strictly as a guideline for calculating the amount of ConSeal product needed.Concrete Sealants, Inc. is not responsible for inaccuracies, which result from unforeseen conditions.