Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

CS-102B Bituminous, Butyl Rubber Sealant

For self-sealing joints in: Manholes, Concrete Pipe, Vaults, Box Culverts, Septic Tanks, and Vertical Panel Structures. Not intended for use in expansion joints or joints that move.

Technical Data

SEALING PROPERTIES

  • Provides permanently flexible watertight joints.
  • Low to high temperature workability: 45°F to 130°F (7°C to +54°C)
  • Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
  • Excellent chemical and mechanical adhesion to clean dry surfaces.
  • Greater cohesive and adhesive strengths.
  • Sealed joints will not shrink, harden or oxidize upon aging.
  • Controlled flow resistance for application ease.
  • No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.

HYDROSTATIC STRENGTH

ConSeal CS-102B meets the hydrostatic performance requirement as set forth in ASTM C-990 section 10.1 (Performance requirement: 10psi for 10 minutes in straight alignment – in plant, quality control test for joint materials.)

SPECIFICATIONS

ConSeal CS-102B meets or exceeds all of the requirements of Federal Specification SS-S-210 (210-A), AASHTO M-198B, and ASTM C-990-91.

CHEMICAL COMPOSITION

DESCRIPTIONSPECREQUIREDCS-102B
HYDROCARBON PLASTIC CONTENT % BY WEIGHT: ASTM D4 (mod.) 50-70 52.1
INERT MINERAL FILLER % BY WEIGHT: SS-S-210A 30-50 47.9
VOLATILE MATTER % BY WEIGHT: ASTM D6 3.0 max. 1.0

IMMERSION TESTING

30-Day Immersion Testing: No visible deterioration when tested in 5% Caustic Potash, 5% Hydrochloric Acid, 5% Sulfuric Acid, and 5% saturated Hydrogen Sulfide.

Physical Properties

DESCRIPTIONSPECREQUIREDCS-102B
COLOR:     Black
SPECIFIC GRAVITY, 77°F: ASTM D71 1.20-1.35 1.22
DUCTILITY, 77°F: ASTM D113 5.0 min. 8
SOFTENING POINT, RING AND BALL °F: ASTM D36 320°F min. 370°F+
PENETRATION, CONE 77°F: ASTM D217 50-120 mm 62 mm
150 gm, 5 sec.      
FLASH POINT, C.O.C., °F: ASTM D92 600°F min. 630°F 
FIRE POINT, C.O.C., °F: ASTM D92 600°F min. 630°F
Safety Data Sheet

Safety Data Sheet (PDF) 
   US HazCom 2012

Project Profiles
Certificate of Conformance