• Benonite-free Waterstop
  • Solvent-free Waterproofing Membrane
  • Tested and Proven Antimicrobial Concrete Admixture
  • Penetrating Surface Densifier and Hardener
Toll Free: 1.800.332.7325
Local/Global: 1.937.845.8776
Email  Contact

ConBlock Family of Products

 ConBlock MIC

ConBlock MIC

   ConBlock Topical

ConBlock Topical

   ConBlock CDA

ConBlock   CDA

What is ConBlock MIC?

ConBlock MIC is an antimicrobial admixture, and/ or topical application that stops the chemical chain of events leading to microbial induced corrosion (MIC).  In addition to scientifically neutralizing Thiobacillus living in the 4+ pH range, it also reduces mold, algae, fungi, and bacteria.

Where to use ConBlock MIC:

• Sewer Treatment Systems
• On-site Wastewater Systems
• Deep Bore Tunnel Shafts

 

 

 

What is ConBlock Topical?

ConBlock Topical is a premium concrete sealer that is applied topically to concrete to repel water.  By penetrating into the pores of the concrete, ConBlock Topical is a permanent treatment and will not peel. 

Where to use ConBlock Topical:

ConBlock Topical can be used in a variety of applications where moisture resistance and staining from microorganisms is important.

• Septic Tanks
• Sewer Manholes
• Sewer Pipe
• Architectural Building Walls
• Highway Barrier Walls
• Concrete Furniture
• Concrete Soil Retaining Walls
• Concrete products used to store aggressive liquids such as chlorides or sugar water

 

 

 

What is ConBlock CDA?

ConBlock CDA is a liquid crystalline waterproofing admixture. When added to concrete, anticipate a faster set, earlier strength gain, and higher 28 day compressive strength, compared to reference concrete. The molecules are fast reacting, allowing enhanced performance almost immediately. Additionally, concrete bleeding is reduced, allowing finish operations to occur sooner. In water pressure testing for over 28 days at 200 psi, no water was able to pass through the concrete. In addition to densification, ConBlock CDA is also a water repellent by creating a molecular hydrophobicity (water repellency) at the surface.

Where to use ConBlock CDA:

• Bridges and highway structures
• Wastewater treatment plants
• Garage and parking structures
• Water containment tanks
• Buildings and foundations
• Tunnels and trenches
• Below-grade precast structures

 

         
 ConBlock SH

ConBlock SH

  ConBlock WR

ConBlock WR

  ConBlock HP

ConBlock HP

What is ConBlock SH?

ConBlock SH is a non-toxic, water-based penetrating concrete sealer made from a proprietary blend of inorganic materials that reacts with Portland Cement Concrete to create crystalline formations within the concrete pore structure. Applying ConBlock SH improves the durability, chemical resistance, and hardness, as well as reducing the porosity of concrete.

Where to use ConBlock SH:

• Concrete in a Freeze-Thaw Environment
• Sidewalks, Driveways, Patios
• Precast Concrete Structures
• Wall Panels and Retaining Blocks

 

What is ConBlock WR?

ConBlock WR is a non-toxic, water-based penetrating concrete densifier and water repelling sealer made from a proprietary blend of inorganic materials. Applying ConBlock WR improves the durability, chemical resistance, and hardness, as well as reducing the porosity of concrete.  ConBlock WR allows for water to bead on concrete, providing a “dry look” to exposed concrete surfaces. Additionally, ConBlock WR will stop the ingress of harmful salts and other liquid contaminants, protecting the concrete from the potential damage these chemicals may cause.  Cleaning treated concrete is made easier, keeping your concrete looking newer longer.  Since ConBlock WR is a penetrating sealer and not a coating, the surface characteristics are virtually unaffected.

Where to use ConBlock WR:

• Walkways, Driveways, Steps, Patios
• Sound Walls, Retaining Walls
• Above Grade Precast Concrete Structures

 

 

What is ConBlock HP?

ConBlock HP is a non-toxic, water-based penetrating concrete sealer made from a proprietary blend of inorganic materials that react with Portland Cement Concrete to create crystalline formations within the concrete pore structure.  No need for scrubbing, washing, or flushing when applying ConBlock HP to concrete flooring applications. ConBlock HP will produce a hardened concrete surface with a satin gloss. The concrete will remain breathable, while resisting the penetrations of liquids or moisture. Concrete floors will not sweat, making ConBlock HP suitable for applications where a laminated floor will be applied.

Where to use ConBlock HP:

• Industrial / Warehouse Floors
• Factory Floors
• Airport Hangers
• Where Alkali-Silica Reactivity is possible